Low Loss Header Pipework 100mm

When Sean was presented with a large low loss header that needed some re-soldering he wasn’t quite sure what to make of it.

low-loss-1

 

This was part of a swimming pool heating system running off 2 x 65 kilowatt GB162 Worcester Bosch Boilers in Haslemere. One of the seals had cracked and the only way to ensure a sound solder seal was to remove the unit and re-solder with the joint in the horizontal postion.

Once the unit was re-fitted the system was re-pressuirised and run up sucsessfully.

low-loss-2